RE Management Committee (REMC)

 
 

Working Groups and Task Forces

WG / TF
Title
Terms of reference
Status
JWF
REMC Joint Working Forum "IECRE/TC88 Joint Working Forum on Model Validation"
  • Ensure collaboration between experts from IECRE and TC88 on the topic of Model Validation in general. This will cover topics such as power performance, loads (extreme and fatigue), siting and energy assessment, noise and grid
  • Define a split between further standards (or updates of standards) required for model validation and conformity assessment documents on model validation
  • Propose the inclusion of the various identified documents (standards and ODs) into the planned work for TC88 and IECRE-Wind respectively
  • The scope of the work is to develop a generic framework for model validation that can be used within the wind energy sector and that gives room for further details on specific topics such as loads model validation (extreme and fatigue loads), power performance model validation, noise model validation, siting and energy assessment model validation, grid model validation and other topics to be defined in the future
  • In order to ensure that the generic model is practically applicable, the first topic that will be worked out in more detail in parallel is validation of the power performance model
Active
Marine Energy Sector Working Group
See IECRE 02, Annex A for SWG Terms of Reference
Active
Solar Energy Sector Working Group
See IECRE 02, Annex A for SWG Terms of Reference
Active
REMC Stakeholder Group 452 "Manufacturers"
TBD
Active
REMC Stakeholder Group 453 "End users"
TBD
Active
REMC Stakeholder Group 550 "Certification Bodies"
  • harmonisation of requirements for the certification process;
  • limiting/reducing national differences;
  • interpretation of technical requirements;
  • transition rules when moving from OD-501 to the new set-up;
  • mutual recognition;
  • improvement of the certification process based on a broad stakeholder input;
  • development and maintenance of the relevant Operational Documents (ODs) for WE-OMC consideration;
  • identification of additional technical requirements necessary to operate the IECRE WE Schemes; and
  • identification of additional certification schemes/services required to support the WE sector.
Active
REMC Stakeholder Group 551 "Test Laboratories"
  • To facilitate harmonized interpretations of testing requirements to global acceptance of test results (i.e. through proficiency testing)
  • To develop necessary Operational Document (OD) for peer assessment of TLs,
  • To give input to the relevant working groups under IECRE Wind
  • To participate in developing a common reporting format for competence areas defined in the IECRE Wind RoP
  • To suggest clarifications regarding TC88 measurement standards
  • To comment on clarification sheets relevant to Test Labs
Active
REMC Stakeholder Group 552 "OEM's"
  • To Represent the interests of the Stakeholder Group members
  • To Request   Comment on Clarification Sheets
  • To facilitate the dialogue between Stakeholder Groups within the IECRE Wind Sector
Active
REMC Stakeholder Group 553 "End users"
The WE-OMC End User Working Group (SG553) shall be open to stakeholders utilizing the WE-OMC certification schemes who are not involved in testing or manufacturing of wind energy equipment. The SG553 shall focus on issues that provide value to stakeholders within the sector. SG553 stakeholders include: Wind developers, owners, operators, service providers, insurers, financiers, land-owners, authorities having jurisdiction (AHJs), and Agents (e.g. Consultants) acting on the behalf of the aforementioned. In reporting to the WE-OMC, the duties of SG553 are to operate as a stakeholder committee to support the scheme to serve market needs, to build trust and in addition to the Terms of Reference of the WE-OMC, shall:
  • Promote mutual recognition of IEC certificates, test reports, and other documents produced through the scheme;
  • Voice the requirements of the End Users for the certification system;
  • Clarify Market Requirements for the certification process;
  • Provide recommendation to the system to ensure competitive Levelized Cost Of Energy (LCOE) for wind;
  • Encourage improvements in safety and reliability;
  • Be an advocate for the system.
Active
REMC Stakeholder Group 554 "Small Wind"
  • to provide a voice and mechanism for broad stakeholder input to the conformity assessment process of small wind turbine (SWT) systems, ensuring visibility of issues unique to SWT;
  • to make recommendations to the WE-OMC and develop the necessary Operational Documents (ODs) regarding the design, testing, certification, and labeling of SWT;
  • to ensure that the understanding of international standards are uniform and relevant to SWT stakeholders; and,
  • to promote global harmonization of SWT certification schemes.
Active
REMC Task Force 003 "RETL proficiency testing"
  • To create document(s) for voting (DV) to be submitted to the WE-OMC member bodies that are based on WE-OMC/358/DC, WE-OMC/359/DC and WE-OMC/360/DC
  • To include in this new document, to the extent possible, the comments received as documented in WE-OMC/366/CC. For comments that are not taken on board, the reason/rationale shall be provided as to why these are not taken on board
  • This specifically means that the Task Force shall not create a new document from scratch but continue the already established work and update the existing document with comments received. This specifically means that the task force should not develop further comments on WE-OMC/358/DC. However, some of the comments in WE-OMC/366/CC are rather generic and the task force should discuss these taking into account the viewpoints from the various stakeholder groups and TF members, and achieve consensus on the best way to deal with these comments. The Proficiency Testing OD, the Participation Certificate and the Proficiency Testing Report must then be updated to reflect the consensus achieved
  • Participation in the task force is on nomination by the Member Body, hence the participants are not formally representing the stakeholder groups but are expected to be able to reflect on the viewpoints from the different stakeholder groups for those SG’s in which they are Members
  • To update the related document WE-OMC/359/DC as per comments received and documented in WE-OMC/367/CC as well as based on the more general discussions and decisions in the task force regarding the implementation of comments as per WE-OMC/366/CC
  • To update the related document WE-OMC/360/DC as per comments received and documented in WE-OMC/368/CC as well as based on the more general discussions and decisions in the task force regarding the implementation of comments as per WE-OMC/366/CC
  • The task force shall be automatically disbanded when the Proficiency Testing OD, the Participation Certificate and the Proficiency Testing Report have all been approved by the WE-OMC
Active
REMC Task Force 004 "Model Validation"
  • Establish the general aim of model validation and how it is used in type and project certification
  • Establish a generic framework for model validation – including a sufficiently detailed mathematical treatment. Such a generic framework must allow further details (for instance in an Annex), for dealing with the details for the validation of each model type individually (such as power performance, loads, siting models, noise, grid, etc)
  • On top of the generic model, the details for power performance validation shall be worked out in detail, also with regards to the mathematical framework
  • An example of the level of detail that at least needs to be worked out is as follows: Assuming that the mathematics involved will include hypothesis testing, then the most common tests used in this context use the variance included within the data as input to the hypothesis test. Specifically for power performance (and most likely also loads) the majority of the uncertainty comes from Category B uncertainty, which often does not fully translate into variance in the data. Hence we would have to agree specifically on the hypothesis testing to make sure that the uncertainty on the input is properly reflected in the outcome of the hypothesis test
  • The task force is also asked to define the split in work between RECBs and RETLs regarding model validation and develop the documents needed to establish competence areas for RECBs and RETLs according to this split
  • Finally, the establishment of a model validation methodology, mathematical framework and RECB/RETL competence areas should not change the fact that the measured power curve is still required as input to the type certification. The intent isto define in more detail how this input is used
Active
REMC Task Force 005 "PV Operational Documents"
  • Reform and rework the PV related OD structure and contents by creation of deliverables that are well described and that appear to be acceptable by the PV market.
  • Develop guidance for the PV SWG to create new stakeholder groups that are necessary to attract participation to the IECRE PV system.
Active
REMC Task Force 006 "PV Rating System"
TBD
Active
Wind Energy Sector Working Group
See IECRE 02, Annex A for SWG Terms of Reference
Active
REMC WG 001 "Maintenance and Development of IECRE Rules"
  • maintenance and development of IECRE Rules,
  • to develop a gap analysis of where we are at and where we want to be in relation to the existing rules,
  • to review existing terms of reference of other similar WGs existing under other IEC Systems,
  • to collaborate with any and all REMC WGs.
Active
REMC WG 003 "Customer Testing Facilities (CTF)"
WG-003 intends to formalize the process of Customer Testing Facilities (CTF) by characterizing Customer Testing Facilities (CTF) for all SWGs and developing and maintaining rules e.g. procedures, OD’s, etc. to allow the use of test results of these facilities in the IECRE system in a similar manner like IECRE TLs.
Active
REMC WG 004 "Promotion & Marketing"
To coordinate, educate and facilitate promotion of the IECRE system with broad participation of international stakeholders, including:
  • Develop and propose vision and mission statements as well as a comprehensive, holistic IECRE strategy for IECRE.
  • Make the promotion of the IECRE services efficient and powerful by coordinated/collective efforts and measured results.
  • Promote IECRE services and educate stakeholders with information that is relevant to the specific target audience.
  • Develop training and onboarding material for new participants in the system
  • Represent IECRE at relevant stakeholder groups, including conferences, associations and regulators.
  • Collect anonymized data on certification and plant performance as justification and trend reporting, and maintain an up-to-date system for field identifiers, definitions, and characterization where appropriate and relevant.
  • Develop the sales and marketing plan for IECRE, also as input for WG 006.
Active
REMC WG 006 "Finance"
1. To establish a funding model for the IECRE budget
2. To propose to the IECRE member bodies and Executive Group an annual budget forecast covering the next five years
3. In case any of the proposed budgets shows a deficit, to discuss possible scenarios and mechanisms, covering both the income and expenditure side of the budget, to ensure that such a deficit can be avoided
4. To propose a final budget, as per 13.5 of the Basic Rules, to the IECRE Member Bodies and the Executive Group, and subsequently to the Executive Secretary for submittal to the Treasurer for circulation to the Member Bodies, as per clause 8.5 b). Such a budget must not show a deficit.
Active
REMC WG 007 "Personnel certification"

Market research to determine if there is a real need for this type of certification, assess regional differences and legal frame works.

 

The WG is tasked with developing Terms of Reference for this WG, which shall include: market research to determine if there is a real need for this type of certification, assess regional differences and legal frame works. The REMC recommends special consideration be given to existing programs and what value the REMC could offer in that respect. This WG is further to collaborate with the OMCs and to take into account their needs, and in collaboration with relevant Technical Committees.

Active
REMC WG 008 "Hybrid/Microgrid systems"

To develop and maintain the rules of procedures for the Hybrid/Microgrid conformity assessment scheme, which would include all the ODs necessary for the scheme as follows, including but not limited to:

  • defining Hybrid/Microgrid system configuration for conformity assessment;
  • defining conformity assessment products for all project development phases;
  • defining procedural elements and steps for conformity assessment at each phase.

 

To establish the roadmap and prioritize the work based on the market need and maturity of standardization of the respective area and input from end-users. To provide advice on conformity assessment matters to all IECRE committees, working groups and task forces and cooperate with IEC SMB TCs and WGs for harmonization.

Excluded from the scope of work is any work on grid connection and grid compliance at the point of common coupling, which is the scope of WG 010.

Active
REMC WG 010 "Grid code compliance"
  • To reach out to system operators in the member countries through the member bodies to participate in the WG010 and establishing Liaisons between IECRE and relevant external organisations
  • to specify guidance for acceptance criteria for RECBs, RETLs, RECTFs and REIBs within IECRE for grid code compliance certification
  • to prepare new ODs for harmonized certification, testing and simulation model validation in the field of grid code compliance
  • to establish references to IEC standards and committees related to grid code compliance
Active
REMC WG 360 "Certification Scope"
WG 360 is tasked with developing and maintaining the necessary Operational Documents (ODs) to operate ME Sector Certification Schemes and deliverables.
Active
REMC WG 361 "Recognition of Marine RECBs and RETLs"
Will be developed by the WG once formed and submitted to the ME-OMC for approval.
Active
REMC WG 402 "Assessment Procedures"
  • To define assessment procedures and develop necessary Operational Documents to assure that RECB/REIB applicants comply with relevant requirements of the PV sector
  • To define the requirements for peer assessment in the PV sector
  • To define master templates for certificates and inspection reports as the base for specific documents in the PV sector

Responsible for OD-408 series

Active
REMC WG 409 "Quality Control"
  • To define procedures and documentation required for Quality System assessment and certification in the IECRE PV sector; including but not limited to module manufacturing, BOS component manufacturing, and system installation
  • To develop necessary Operational Documents in terms of assessment procedures, auditor competency and qualification, and consistent application of relevant standards; to meet the requirements of the PV sector

Responsible for OD-405 series   OD-410 series.

Active
REMC WG 501 "Rules of Procedure"
  • to develop draft Rules of Procedure for consideration by the WE-OMC,
  • to develop necessary OD and technical guidance documents for qualification of CBs and TLs,
  • to transition IEC 61400-22 into IECRE including splitting the document into technical requirements and conformity assessment process(es).
Active